It is one of the first questions anyone asks when liquid screed comes up on a project. The honest answer is that liquid screed cost varies, and anyone quoting you a firm price per square metre without knowing your project details should be treated with caution. That said, there are a set of factors that consistently drive the price up or down, and understanding them will help you budget accurately and compare quotes properly.
This guide covers what affects liquid screed prices, what you can realistically expect to pay, and how Ready2Pour approach quoting.
What Affects Liquid Screed Cost?
Floor area
Liquid screed is typically priced per square metre and the larger the area, the lower the unit cost tends to be. A large open-plan floor on a commercial project or new build development will almost always come in at a lower price per m2 than a small domestic extension, because the fixed costs of mobilising the team and equipment are spread across more material.
Screed depth
More material means a higher cost, so the depth you need directly affects the total liquid screed price. Depth is determined by your floor build-up: whether you are on insulation, over underfloor heating pipes, bonded to a substrate or working to a tight floor height.
Product choice
Not all liquid screeds cost the same. The Gyvlon range covers several products at different price points, from the general-purpose Gyvlon ECO through to specialist formulations like Gyvlon THERMIO MAX, which offers higher thermal conductivity for underfloor heating applications, and Gyvlon EXCELIO, which can be bonded at just 8 mm.
Supply only or supply and installation
If you have your own screeding team and are buying screed to be delivered to site, you are looking at a supply-only cost. If you want Ready2Pour to handle the installation as well, the installation cost is added on top.
Pump hire
For sites where the delivery vehicle cannot get close to the pour area,or where screed needs to reach an elevated floor, liquid screed pump hire adds to the overall cost. Our pumps reach up to 100 metres from the vehicle, but if your project requires this, it is worth factoring into your budget from the outset.
Access and location
Site access affects cost. A straightforward ground-floor pour with good vehicle access is simpler and cheaper to service than a multi-storey site with restricted entry. Location within our service area also plays a role in delivery pricing, though Ready2Pour cover Hertfordshire, Essex, Cambridgeshire, Greater London, Bedfordshire and Buckinghamshire from our base in Bishop’s Stortford, so most projects in these regions are well within a standard delivery zone.
Is Liquid Screed More Expensive Than Sand and Cement?
The material cost of liquid screed is typically higher per tonne than sand and cement screed, but this comparison rarely tells the whole story.
When you factor in installation speed – liquid screed can cover up to 2,000 m2 per day compared to around 150 to 200 m2 for sand and cement – the labour cost per square metre is significantly lower. The faster a floor is down, the sooner the next trade can start, which on a time-sensitive project has a real commercial value.
Liquid screed also requires fewer movement joints and is far less prone to cracking than sand and cement, which reduces remediation costs. And for projects with underfloor heating, the improved thermal conductivity of a product like Gyvlon THERMIO MAX means the heating system runs more efficiently over the life of the building, delivering ongoing savings on energy bills.
So while the upfront liquid screed price can be higher, the total cost across a project is often comparable or lower.
What is Included in a Liquid Screed Quote?
At Ready2Pour, our quotes are transparent and based on a precise measurement of your floor area. A typical quote will cover:
- Material cost for the specified Gyvlon product and depth
- Delivery to site
- Installation labour (if a full supply and installation service is requested)
- Pump hire (if required)
We measure every project accurately before quoting, which means you are not left with material shortfall on the day or paying for screed you did not need.
How to Get an Accurate Liquid Screed Price
The best way to get a reliable figure is to have the following ready when you contact us:
- Floor area in m2: An approximate measurement is fine to start with; we will take a precise measurement before the quote is finalised
- Screed depth required: If you are unsure, tell us about your floor build-up and we can advise
- Whether you need supply only or supply and installation
- Site access details: Is the vehicle able to get close to the pour area or will pump hire be needed?
- Your location and preferred delivery window
From there we can turn around a quote quickly. We offer screed supply and full installation across our service area, and our team will advise on the right product for your project as part of the quoting process. You can find out more about our liquid floor screed services or get in touch.
Common Questions About Liquid Screed Cost
Why do liquid screed prices vary so much between suppliers?
Product quality, service level and geographic coverage all play a part. A price that looks significantly lower than others may reflect a cheaper screed product or no BBA approval. All Gyvlon screeds supplied by Ready2Pour are BBA-approved, which gives you assurance on quality regardless of which product you choose.
Does screed depth significantly affect the price?
Yes, even a difference of 10 mm across a large floor area adds up to a meaningful volume of material.
Is there a minimum order?
Ready2Pour has a minimum order size, which varies by product and project type. Contact us and we will confirm whether your project meets the threshold or discuss options.
How quickly can I get a quote?
We aim to turn quotes around promptly. Call us on 01277 890 111 or use the contact form and we will get back to you.
Get a Quote from Ready2Pour
Ready2Pour are liquid screed specialists based in Bishop’s Stortford, covering projects across Hertfordshire, Essex, Cambridgeshire, Greater London, Bedfordshire and Buckinghamshire. We supply and install BBA-approved Gyvlon screeds and offer transparent, accurate quotes based on your project specifics.
Whether you need screed supplied to your site or a complete supply and installation service, get in touch for a free quote.