Liquid screed pump hire provides a fast and convenient way to move liquid screed from the delivery vehicle to exactly where it is required on site. Whether you are working on a residential property, new build, or larger commercial project, a specialist pump can make handling and installing screed considerably easier.
Unlike traditional sand and cement screed, which typically requires more manual levelling and handling, liquid screed can be pumped through a hose directly into the required area. This makes liquid floor screed pump hire particularly useful for large areas, underfloor heating systems and sites where access is limited.
This article will outline what is actually included when you hire a liquid screed pump, and how the process works.
What Is Included With Liquid Screed Pump Hire?
The exact details of a pump hire service can vary depending on the requirements of the job, but the main piece of equipment is a specialist liquid screed pump designed to move the material efficiently around the site.
The pump features a suitable length of hose, allowing the screed to be delivered from the vehicle to the area being poured. This can be particularly beneficial when the screed is required some distance from the point where the delivery vehicle can park.
Before arranging screed pump hire, it is important to provide details about your project, including the location, size of the area and site access. The distance from the pump to the furthest point of the pour is also useful information, as this helps ensure the correct setup is arranged for accuracy.
Preparing the Site Before the Pump Arrives
Good preparation is an important stage of any liquid screed project. Before the pump arrives, the floor should be ready for the screed to be poured, with any insulation, membranes and other required materials correctly installed.
If liquid screed is being used with underfloor heating, the underfloor heating systems should also be installed and secured before the pour begins. This allows the liquid material to flow around the pipework and create consistent coverage.
Access should also be considered. There needs to be a suitable location to facilitate the pump and screed delivery vehicle, as well as a clear route for the hose to reach the pour area.
Setting Up the Liquid Screed Pump
Once the equipment arrives on site, the liquid screed pump can be positioned and the hose set up between the pump and the required location.
The setup will depend on the layout of the site and the distance or height the screed needs to travel. A line pump makes it possible to navigate around buildings and through areas where direct vehicle access may not be possible.
Before pumping begins, the equipment and hose need to be prepared to ensure the material can move through the system correctly. Proper setup is important for maintaining a consistent flow and reducing the risk of delays or blockages during the job.
Pumping the Liquid Screed
Once everything is ready, the liquid screed can be transferred into the pump and delivered through the hose to the floor.
The screed is placed progressively across the required area, allowing the team laying the floor to control the level and achieve the required finish. Because the material can be delivered directly where it is needed, pumping can significantly reduce the amount of manual handling required compared with moving material around the site by hand.
The speed of a liquid screed pump also makes this approach ideal for large areas and commercial projects where large quantities of screed may need to be placed within a limited timeframe.
What Happens After Pumping?
Once the required amount of screed has been pumped, the floor can be finished according to the requirements of the particular mix being used. The screed must then be allowed to set and dry before the next stages of the flooring project can begin.
The pump, hose and associated equipment also need to be cleaned after use. This is an important part of the process because allowing screed or cement-based material to set inside pumping equipment can cause blockages and affect future performance.
Drying times and the next steps will depend on the kind of liquid screed being used, its depth and the conditions on site, so always follow the recommended advice for your chosen product.
Liquid Screed Pump Hire from Ready2Pour
If you need reliable liquid screed pump hire, Ready2Pour can provide the equipment and assistance required to keep your project moving. Based in Bishop’s Stortford, we provide liquid screed services across Essex, Hertfordshire, Cambridgeshire, Greater London, Bedfordshire and Buckinghamshire for both domestic and commercial projects.
Our liquid screed pumps can deliver material up to 100 metres from the vehicle, making them suitable for projects where access is limited or the pour location is some distance from the road.
We can also support your project with liquid screed supply and installation, giving you the flexibility to choose the service that matches your requirements. Get in touch with Ready2Pour to discuss availability, your site and the liquid screed pump hire options suitable for your project.