Gyvlon® ECO FD E2C Liquid Screed
Gyvlon ECO FD E2C® liquid screed is ideal for use on projects with tight time schedules; helping you achieve demanding deadlines while maintaining the advantages of an anhydrite screed.
FastDrying
Very HighFluidity
NoReinforcement
No Curing Membrane
Low-Carbon Solution
Gyvlon® Screed version with Faster Drying (FD) and Early To Cover (E2C®)
Anhydritec Ltd has developed Gyvlon® ECO FD E2C® technology to complement its Gyvlon® range of screeds. Designed for jobsites with reduced lead times, ECO FD E2C® screed enables floor coverings to be applied at least twice as fast as Gyvlon® ECO screed; under the same conditions. In addition, Gyvlon ECO FD E2C® brings together all proven benefits expected from a Gyvlon® screed.
- Very high fluidity
- No shrinkage
- Large bay sizes
- No reinforcement
- No curing membrane
- Minimum SR2 surface finish
- Environmentally friendly, greatly reduced CO2 and carbon content
Ready2Pour are Gyvlon screed suppliers based in Bishop’s Stortford. We supply and install Gyvlon ECO FD E2C for residential and commercial projects across Hertfordshire, Essex, Cambridgeshire, Greater London, Bedfordshire and Buckinghamshire, and can advise on Gyvlon prices and whether FD E2C is the right product for your project requirements.
Productivity & Ease of Use
The ECO FD E2C® screed exhibits very high productivity rates (200 m²/h). It is possible to walk on after 24 hours, and will generally accept trades within 48 hours.
Shorter lead times before floor covering
The E2C® technology (Early to Cover) strengthens the screed properties, especially at the surface, increasing adhesion performance, allowing risk free floor covering even at high
moisture content (MC), from 1,5% MC for tilesD and vinylsE.
Versatility & Freedom
Gyvlon ECO FD E2C is suitable for a wide range of applications including underfloor heating, thermal and acoustic insulation builds and floor levelling. It carries all the standard benefits of the Gyvlon range: no reinforcement, no curing membrane, large bay sizes and a minimum SR2 surface finish.
Outstanding Performance
The table below shows the key technical characteristics and installation guidelines for Gyvlon ECO FD E2C. For project-specific advice, contact the Ready2Pour team.
Technical Characteristics
| Mechanical strength | C25-F5 BSEN 13813 |
| Dry density | 2 000 kg/m³ (± 200) |
| Design thickness | Min 30 mm – unbonded |
| Design thickness | Min 35 mm (domestic) 40 mm (commercial) – floating |
| Substrate type | Suitable for most substrates |
| Substrate regularity | SR2 – BSEN 8204-7 |
| Reinforcement | Requires no reinforcement |
Installation Benefits
| Flow | 240 mm (± 10 mm) |
| Joints | 800 m² (300 m² for UFH) |
| Productivity | Up to 200 m2 / hour or 2 000 m2 / day |
Max Moisture Content of Substrate A, B
| Carpets | from 2% MCC |
| Tiles | from 1.5% MCD |
| Vinyls | from 1.5% MCE |
- Carbide measurement or oven drying at 40°C. Adhesive manufacturers recommendation should also be followed
- UFH screed values: Tiles 1%, Vinyls 1%& Carpets 2%. Before applying a floor covering, the UFH must be commissioned in accordance with industry guidelines.
- Bonded carpet excluded
- A suitable primer should be used as per industry recommendation.
- With suitable vapour barrier & smoothing compound; if direct bond where finishes allow then 1%.
Need Quality Liquid Screed Fast?
Contact Ready2Pour Today
The Right Solution For Any Project
Gyvlon ECO
Gyvlon ECO FD E2C
Gyvlon XTR
Gyvlon THERMIO MAX
Gyvlon FINIO
the best choice.
Gyvlon EXCELIO
Our Screed uses 98% Recycled Binder
Sustainability is at the heart of everything we do. We specialise in supplying and installing Gyvlon screeds, an innovative flooring solution that prioritises environmental responsibility without compromising on quality.
The binder in our screeds is made up of an impressive 98% recycled materials, significantly reducing waste and environmental impact. By choosing our services, you’re not just investing in a durable, high-performance flooring system; you’re also making a conscious choice to support sustainable building practices. Together, we can create a greener future, one project at a time.
Need Quality Liquid Screed Fast?
Contact Ready2Pour Today
Gyvlon ECO FD E2C Screed Suppliers & Installers
Ready2Pour are Gyvlon ECO FD E2C screed suppliers based in Bishop’s Stortford. We supply and install BBA-approved Gyvlon liquid screed across Hertfordshire, Essex, Cambridgeshire, Greater London, Bedfordshire and Buckinghamshire.
We are proud to deliver on our promise to you, on time every time
is our company ethos as we know how important it is to deliver when
you want it.
You are more than just a number to us, we care about the service we offer and we take a personal approach to all of our customers.
Frequently Asked Questions
What does FD E2C mean in Gyvlon ECO FD E2C?
FD stands for Fast Drying and E2C stands for Early to Cover. Together these technologies accelerate drying and allow floor coverings to be applied at higher moisture content than standard Gyvlon ECO, meaning less waiting time between the screed pour and finishing trades.
How much faster does Gyvlon ECO FD E2C dry than standard Gyvlon ECO?
Under the same conditions, Gyvlon ECO FD E2C allows floor coverings to be applied at least twice as fast as standard Gyvlon ECO. It is the preferred choice for new builds, commercial projects with handover deadlines, or any project where minimising time between screed and finishing trades is a priority.
Is Gyvlon ECO FD E2C suitable for underfloor heating?
Gyvlon ECO FD E2C is fully compatible with underfloor heating systems. If underfloor heating performance rather than drying speed is the primary requirement, Gyvlon THERMIO MAX offers higher thermal conductivity and may be a better specification.
Can I get Gyvlon ECO FD E2C prices from Ready2Pour?
Yes, Ready2Pour are Gyvlon screed suppliers based in Bishop’s Stortford covering Hertfordshire, Essex, Cambridgeshire, Greater London, Bedfordshire and Buckinghamshire. We can provide pricing based on your floor area, depth, and service requirements. Call 01277 890 111 for a quote.